Skip to content
Home & structure

Concrete Removal Cost Calculator: Cost Per Square Foot

Price tearing out a concrete or asphalt driveway, patio, sidewalk or slab: enter the length and width, choose the material, add the feet of saw cutting and any dump fees by the ton, and add new concrete for a removal and replacement price. The rates are set from public bid tabs and landfill gate rates. Copy the share link, or switch to contractor bid mode to build a proposal.

Reviewed by the EstiCube editorial teamPrices updated All calculators
Concrete driveway half torn out: a saw-cut slab still in place, broken slab pieces and a jackhammer on the exposed gravel base, a blue roll-off dumpster full of concrete chunks and a safety cone illustration for concrete removal cost calculator

Concrete removal is priced by area: public bid tabs pay for it per square yard, and the calculator works per square foot. The EstiCube concrete removal cost calculator takes the length and width of the slab, concrete or asphalt, the linear feet of saw cutting and any dump fees billed per ton, and prices each as its own line. An optional line adds new concrete over the same area, as a sidewalk or patio or as a driveway. The $500 minimum is a floor that sets the price only when the job adds up to less.

The removal rates are medians of 2025 and 2026 city bid tabs from Denver and South Milwaukee, Wisconsin, with state DOT averages for asphalt. Those city jobs ran to hundreds or thousands of square yards, so a small private job can price above them, and rebar, a thick slab or tight access can push a quote up; the tabs show no price step for any of them, so the calculator has no input for them. The calculator leaves out basement or foundation demolition, building demolition, asbestos or contaminated material, regrading and new base. This is an estimate, not a quote.

Planning the new pour in detail, with cubic yards, rebar and delivery? Use the concrete calculator. Need new base under the replacement slab? Use the gravel calculator.

Concrete removal cost per square foot: prices used

The removal, saw-cut and new-concrete lines are priced from public bids, the dump fee from two landfill gate rates, and the minimum is an estimate. The examples use the default job, a 24 by 20 ft slab (480 SF) with one 24 ft saw cut, plus 5 tons where dump fees are shown.

Line itemUnit priceNotes
Concrete removal$1.70 per SF480 SF, $816; the median of 31 Denver and South Milwaukee bids, $15 per SY (about $1.67 per SF), rounded
Asphalt removal$0.55 per SF480 SF, $264; the median of six public prices, $4.97 per SY
Saw cutting$2.10 per LF24 LF, $50; South Milwaukee’s two 2025 bids ($1.95 and $2.20) only
Dump fees$45 per ton5 tons, $225; the midpoint of two California landfill gate rates. 0 tons by default: use it only when the hauler bills dump fees separately
New concrete sidewalk or patio$8.75 per SF480 SF, $4,200; the median of 12 public prices for new sidewalk, $8.78, rounded
New concrete driveway$10.50 per SF480 SF, $5,040; the median of 14 public prices for 6 in pavement and drives, $10.39, rounded
Minimum job charge$500Floor for a small job; the total is raised to it only if it would be lower; an estimate

The default job, 480 SF of concrete with a 24 ft saw cut, comes to $866, which is $1.80 per SF. With a new concrete driveway it is $5,906, or $12.30 per SF.

How much does concrete removal cost?

With the defaults, tearing out a 24 by 20 ft concrete driveway (480 SF) with one 24 ft saw cut comes to $866, which is $1.80 per SF: $816 for the removal and $50 for the saw cutting. A larger 40 by 24 ft driveway (960 SF) with the same saw cut comes to $1,682, or $1.75 per SF.

Asphalt costs less to remove at the default prices: $0.55 per SF against $1.70 for concrete. The default size in asphalt adds up to $314, so the $500 minimum sets the price; a 40 by 24 ft asphalt driveway comes to $578.

The $500 minimum is a floor that sets the price only when the job adds up to less. A 12 by 16 ft patio (192 SF) with a 16 ft saw cut adds up to $360, so the price is $500. At the default prices that happens for concrete with the default 24 ft saw cut up to 264 SF, and for asphalt up to 817 SF.

Dump fees are 0 tons by default. If your hauler bills them separately, enter the tons from their quote: 5 tons add $225 and 10 tons $450 at $45 per ton. The calculator does not convert square feet into tons, because no source we opened gives the weight of broken concrete.

Concrete removal and replacement cost

Choose a replacement to price new concrete over the removed area. A new driveway is $10.50 per SF, so the default job becomes $5,906, or $12.30 per SF. A new sidewalk or patio is $8.75 per SF, so the default job becomes $5,066, or $10.55 per SF. Taking out an asphalt driveway and pouring a concrete one in its place comes to $5,354 at the default size.

The driveway price is the median of 14 public prices for new 6 in concrete: the two Denver contracts’ 6 in concrete pavement bids per square yard, four City of Madison, Wisconsin bids for 6 in concrete sidewalk and drive, and South Dakota DOT’s 2024 average low bid for 6 in PCC driveway pavement. They ran from $7.22 to $27.00 per SF, with a median of $10.39. The sidewalk and patio price is the median of 12 prices for new sidewalk from Denver, South Milwaukee and South Dakota DOT, from $5.00 to $11.87 per SF.

The replacement line is a single installed price per square foot. For a detailed pour estimate, with the slab thickness, cubic yards of ready mix, rebar and delivery, use the concrete calculator, and price any new gravel base with the gravel calculator.

How the removal rates compare with public bids

Denver’s 2026 Citywide ADA Ramp & Concrete Repair contracts A (202683175, 5 bidders) and B (202582814, 4 bidders) priced removal of sidewalk, detached sidewalk and concrete pavement per square yard. In contract A the bids for removal of concrete pavement were $15, $17, $14, $20 and $15, and for removal of sidewalk $10 to $20. South Milwaukee’s 2025 Concrete Program (bid opening June 5, 2025) had 2 bidders: $5.91 and $10.00 for concrete pavement removal and $11.31 and $10.00 for sidewalk removal. Across the 31 city values the median was $15 per SY for sidewalks and for pavement alike, about $1.67 per SF, which the calculator rounds to $1.70.

The spread is wide. At South Milwaukee’s low pavement bid ($5.91 per SY) the default job would add up to $365 and the $500 minimum would set the price; at Denver’s high bid ($20 per SY) it would be $1,117. South Dakota DOT’s 2024 Bid Item Price Report gives Remove Concrete Driveway Pavement at $14.11 per SY and Remove Concrete Sidewalk at $12.26 as average low bids. A state DOT price is one state’s price for highway lettings.

Thickness and rebar have no input because the tabs show no price step for them: Denver’s removal of concrete pavement bids ($12 to $20 per SY), on contracts whose new pavement items run 6 to 12 in thick, fell in the same $10 to $20 range as its removal of sidewalk bids, and no tab we opened prices removal by thickness or rebar. Rebar or mesh, a thick slab and tight access can still push a quote up, so ask the contractor. City jobs remove hundreds or thousands of square yards; Denver’s contract A had 4,150 SY of detached sidewalk. A small private job can price above these medians.

Asphalt removal is $0.55 per SF, the median of six values per SY: South Milwaukee’s full-depth asphalt removal bids ($5.84 and $5.00), South Dakota DOT’s 2024 average low bid ($9.12), and Wisconsin DOT’s Removing Asphaltic Surface averages for fiscal years 2023 to 2025 ($4.94, $3.31 and $4.14). Saw cutting is $2.10 per LF, from South Milwaukee’s two 2025 bids of $1.95 and $2.20, so it rests on one tab; the same rate is used for asphalt.

Haul-off, dump fees and what the estimate leaves out

The city removal items are paid as complete removal, and haul-off is usually part of the removal price, but we did not open the specifications, so confirm it with your contractor. The dump fee line is for a job where the hauler bills disposal separately by the ton.

The $45 per ton default is the midpoint of two gate rates at two WM landfills in Marin and Alameda counties, California: Redwood Landfill’s $36.74 per ton for concrete with no rebar (effective October 2025) and Altamont Landfill’s $52.42 per ton for clean concrete, asphalt and brick (effective January 19, 2026). Gate rates vary widely from region to region, so replace it with your local landfill’s rate. At those two rates, 10 tons would add $367 or $524.

The estimate covers tearing out flatwork and, if you choose it, new concrete over the same area. It leaves out basement or foundation demolition, building demolition, asbestos or contaminated material, regrading and new base material.

Using the estimate in a bid

Measure the slab, run the calculator, then switch to contractor bid mode. In bid mode the default job’s $866 becomes a customer price of $1,143.12 with 10% overhead and 20% profit, and the removal and replacement job’s $5,906 becomes $7,795.92.

The removal, saw cutting and new concrete prices come from public bids, which are contractors’ selling prices, so they already include overhead and profit. Replace them with your own costs in the pricing section before you add markup, or the markup counts them twice. There is no material tax on this job, because the new concrete is priced installed.

How to use the concrete removal cost calculator

  1. Measure the length and width of the driveway, patio, sidewalk or slab in feet.
  2. Choose the material to remove: concrete or asphalt.
  3. Enter the linear feet of saw cutting, such as the edge where the old slab meets concrete that stays, or 0 for none.
  4. Enter the tons of dump fees if your hauler bills them separately, or leave it at 0.
  5. Choose a replacement: none, new concrete sidewalk or patio, or new concrete driveway.
  6. Open the pricing section to replace any rate or the minimum job with a local quote, then review the line items and the cost per SF, and copy the share link or switch to contractor bid mode to add overhead, profit and a printable proposal.

Concrete removal cost FAQ

How much does concrete removal cost per square foot?

The calculator uses $1.70 per SF, from a median of $15 per SY in 31 Denver and South Milwaukee bids. With a 24 ft saw cut, a 480 SF driveway comes to $866, which is $1.80 per SF. Small jobs can hit the $500 minimum.

How much does it cost to remove and replace a concrete driveway?

At the default prices, removing a 480 SF concrete driveway with a 24 ft saw cut and pouring a new concrete driveway comes to $5,906, or $12.30 per SF: $866 for the tear-out and $5,040 for the new driveway at $10.50 per SF.

How much does asphalt removal cost?

The calculator uses $0.55 per SF, the median of six public prices from South Milwaukee, South Dakota DOT and Wisconsin DOT ($4.97 per SY). A 40 by 24 ft asphalt driveway with a 24 ft saw cut comes to $578. A smaller one can hit the $500 minimum.

How much does it cost to remove a concrete patio?

A 12 by 16 ft patio with a 16 ft saw cut adds up to $360, so the $500 minimum sets the price. With a new concrete patio over the same area it comes to $2,040.

Does the price include hauling the concrete away?

The removal rates come from city items paid as complete removal, and haul-off is usually included, but we did not open the specifications. If your hauler bills dump fees separately, enter the tons: the default is $45 per ton, the midpoint of two California landfill gate rates.

Does thicker concrete or rebar cost more to remove?

Often, but the public tabs we used show no price step for it: Denver’s removal of concrete pavement bids ($12 to $20 per SY), on contracts whose new pavement items run 6 to 12 in thick, fell in the same $10 to $20 range as its removal of sidewalk bids, and no tab we opened prices removal by thickness or rebar. So the calculator has no thickness or rebar input. Ask your contractor whether rebar, a thick slab or tight access changes their price.

Why might my quote be higher than the calculator?

The rates come from city contracts that removed hundreds or thousands of square yards, and a small private job can price above them. The $500 minimum covers part of that. Replace the rates with a local quote in the pricing section.

What is the minimum charge for concrete removal?

The calculator uses a $500 minimum job, an estimate. The minimum is a floor that sets the price only when the job adds up to less: a 10 by 10 ft slab with a 10 ft saw cut adds up to $191, so the price is $500.

Sources