Skip to content
Landscape & lawn

Tree Removal Cost Calculator: Price by Trunk Size

Price taking down trees by trunk size: enter how many trees fall in each diameter band, from small (under 12 in) to giant (over 48 in), choose whether to grind the stumps, and add extra crew hours, a percentage for trees near a house, fence or lines, and a permit fee. The tree prices are set from public bid tabs. Copy the share link, or switch to contractor bid mode to build a proposal.

Reviewed by the EstiCube editorial teamPrices updated All calculators
Lawn with a fresh tree stump showing its growth rings in a ring of sawdust, an orange chainsaw beside it, the trunk cut into logs, a heap of limbs, a standing tree behind and two safety cones illustration for tree removal cost calculator

Public bid tabs price tree removal per tree by trunk diameter band, and so does the calculator. The EstiCube tree removal cost calculator takes a count of trees in five bands, measured across the trunk at chest height, prices each band as its own line, and adds stump grinding at the stump grinding calculator’s per-inch rates. Extra crew hours, a near-house percentage and a permit fee are optional lines. The $400 minimum is a floor that sets the price only when the job adds up to less.

The tree prices are the pooled medians of two public bid tabs with 7 bidders each: North Carolina DOT Division 3’s January 2026 tree removal bid and the City of Flint, Michigan’s 2024 urban forestry proposal. The crew rate is North Carolina DOT’s median hourly bid for tree trimming and clearing. The near-house percentage and the minimum job are estimates with no public source. The calculator leaves out crane-only removals, utility line clearance, firewood splitting, replanting and root work. This is an estimate, not a quote.

Know the exact stump sizes, or only need stumps ground? Use the stump grinding cost calculator. Clearing a wooded lot rather than a handful of trees? Use the land clearing cost calculator.

Tree removal cost by size: prices used

Prices per tree by trunk diameter, measured at chest height. The examples are one tree of each size with its stump ground, using the band’s representative stump size.

Line itemPriceNotes
Small tree, under 12 in$375 per treeWith its stump ground (9 in), $407; median of 14 public bids
Medium tree, 12–24 in$600 per treeWith its stump ground (18 in), $663; median of 21 public bids
Large tree, 24–36 in$1,000 per treeWith its stump ground (30 in), $1,105; median of 21 public bids
Very large tree, 36–48 in$2,000 per treeWith its stump ground (42 in), $2,147; median of 21 public bids
Giant tree, over 48 in$2,900 per treeWith its stump ground (54 in), $3,089; median of 14 public bids, $2,875, rounded
Stump grinding$3.50 per inch for one stump, $2.50 per inch for the restThe stump grinding calculator’s rates, with no trip charge because the crew is already on site; $138 for the default job’s 18 in and 30 in stumps
Extra crew hours$325 per hourCleanup, storm-damaged or fallen trees and limbs; North Carolina DOT’s median bid for tree trimming and clearing
Near house, fence or lines0% (you set it)A percentage added to the tree lines; an estimate with no public source. At 10% the default job is $1,898
Permit fee$0 (you set it)Passed through as its own line if your town charges one
Minimum job charge$400Floor for a very small job; the total is raised to it only if it would be lower; an estimate

The default job, one 18 in tree and one 30 in tree with both stumps ground, comes to $1,738, which is $869 per tree. Without stump grinding it is $1,600.

How much does tree removal cost?

With the defaults, removing one medium tree (18 in) and one large tree (30 in) and grinding both stumps comes to $1,738, which is $869 per tree: $600 and $1,000 for the trees and $138 for the stumps. Without stump grinding it is $1,600.

The size band sets the tree price. One tree with its stump ground comes to $407 for a small tree, $663 for a medium tree, $1,105 for a large tree, $2,147 for a very large tree and $3,089 for a giant tree. Two medium trees and one large tree with stumps come to $2,383, and two medium, two large and one very large tree to $5,563.

Diameter is measured across the trunk at chest height. If you only know the distance around the trunk, divide it by 3.14 to get the diameter. A tree near the band edge can go either way, so ask the contractor which band they would put it in.

The $400 minimum is a floor that sets the price only when the job adds up to less. One small tree without stump grinding adds up to $375, so the price is $400. With its stump ground it adds up to $407 and the minimum does not apply.

How the size bands are priced

Each band price is the median of two public tabs pooled together. North Carolina DOT Division 3’s Division Wide Tree Removal Bid (D3POC0246, tab dated 01/15/2026) had 7 bidders price Selective Tree Cutting per tree in eight diameter bands from 6–12 in to 48 in and larger. For 12–18 in trees the bids were $400 to $550, and for 48 in and larger $2,200 to $3,400. The City of Flint, Michigan’s Proposal #24000552 for Urban Forestry Services (period 7/1/24 to 6/30/27) had 7 bidders price tree removal per tree by dbh, many as ranges; we used the middle of each range. Flint’s sheet says the results are before evaluation team review and award recommendation.

The two tabs do not price the same work. Flint’s removal item includes grinding the stump and backfilling with seeding, while North Carolina’s Selective Tree Cutting is a separate item from its stump grinding. The pooled medians mix the two, so the calculator’s stump line can overlap the Flint part of the price. For 12–24 in trees the 21 values ran from $213 to $1,380, and the median was $600.

At the representative sizes, 9, 18, 30, 42 and 54 in, the band prices come to about $33 to $54 per inch of diameter. The Village of River Forest, Illinois’s FY 2026 Tree and Stump Removal Bid Tabulation (7/17/25) had 4 bidders price removal per inch of diameter: $31, $45, $48 and $54 for trees up to 25 in, and $39, $50, $58 and $90 over 25 in, with stump removal as a separate item. For the default job’s 18 in and 30 in trees the calculator sits at or below the low end of River Forest’s bids: at its lowest bids an 18 in tree would be $558 and a 30 in tree $1,170, against $600 and $1,000 here. The other bands fall inside River Forest’s range.

Two state DOT figures are rougher checks. Wisconsin DOT’s Average Unit Price List (10/21/2025) gives its Clearing item at $35.77, $33.07 and $75.34 for fiscal years 2023 to 2025, in a unit it lists as ID, which we read as an inch of diameter. South Dakota DOT’s 2024 Bid Item Price Report gives Clear and Grub Tree at $944.41 per tree as the average low bid over 406 trees on 19 contracts, with no tree size. A state DOT price is one state’s price for highway lettings.

Stump grinding, crew hours and what the price includes

Stump grinding uses the stump grinding calculator’s rates: one stump at $3.50 per inch and every other stump at $2.50 per inch. The calculator gives the first-stump rate to the smallest stump and adds no trip charge or stump minimum, because the crew is already on site. Each band uses a representative stump size, 9, 18, 30, 42 and 54 in, so the default job’s stumps are 18 × $3.50 + 30 × $2.50 = $138. For exact stump sizes, depth, root grinding or chip haul-away, use the stump grinding calculator.

Extra crew hours cover work the per-tree price does not: cleanup, storm-damaged or fallen trees, and limbs. The rate is $325 per hour, the median of North Carolina DOT’s 7 bids for Tree Trimming and Clearing ($300 to $550 per hour). Four crew hours with no trees come to $1,300, and two hours added to the default job bring it to $2,388.

The near-house percentage is for trees that have to be taken down in pieces over a house, a fence or lines. No public price we found sets it, so it is 0% by default and you choose it; at 10% the default job is $1,898, and at 25% it is $2,138. The permit fee is passed through as its own line: a $100 fee brings the default job to $1,838.

There is no debris line. Flint’s removal price includes grinding the stump and backfilling, and Clark County, Washington’s 2025 on-call tree crew rate includes disposal of debris; North Carolina DOT’s tab does not say whether haul-off is included. The calculator assumes haul-off is in the tree price, so confirm it with the contractor. There is no discount for leaving the wood on site, because no public price sets one. Crane-only removals, utility line clearance, firewood splitting, replanting, root work and clearing a whole lot are left out.

Using the estimate in a bid

Count the trees by band on the walk-through, add crew hours for cleanup or storm work, then switch to contractor bid mode. In bid mode the default job’s $1,738 becomes a customer price of $2,294.16 with 10% overhead and 20% profit.

The tree prices come from public bids, which are contractors’ selling prices, so they already include overhead and profit. Replace them with your own costs in the pricing section before you add markup, or the markup counts them twice. There is no material tax on this job, because removal, grinding and crew time are services.

How to use the tree removal cost calculator

  1. Measure each tree’s trunk diameter at chest height and enter how many trees fall in each band: small, medium, large, very large and giant.
  2. Leave stump grinding on to grind every stump at the stump grinding rates, or turn it off.
  3. Enter any extra crew hours for cleanup, storm-damaged or fallen trees and limbs.
  4. Enter a near-house percentage if trees stand over a house, fence or lines, and the permit fee if your town charges one.
  5. Open the pricing section to replace any tree price, the stump rates, the crew rate or the minimum job with a local quote.
  6. Review the line items and the cost per tree, then copy the share link or switch to contractor bid mode to add overhead, profit and a printable proposal.

Tree removal cost FAQ

How much does it cost to remove a tree?

At the default prices, one tree is $375 under 12 in, $600 at 12–24 in, $1,000 at 24–36 in, $2,000 at 36–48 in and $2,900 over 48 in, before stump grinding. The default job, an 18 in and a 30 in tree with both stumps ground, comes to $1,738.

How much does it cost to remove a large tree?

A large tree, 24–36 in across the trunk, is $1,000 in the calculator, or $1,105 with its stump ground. A very large tree, 36–48 in, is $2,000, or $2,147 with its stump. North Carolina DOT’s 7 bids in January 2026 for 36–42 in trees ran from $980 to $2,250.

Does tree removal include stump grinding?

In the calculator, stump grinding is a separate line you can turn off. It adds $138 to the default job. Some public prices include it: Flint’s removal item included grinding the stump and backfilling. Ask your contractor whether their price includes the stump.

How is the tree size measured?

By the diameter of the trunk at chest height. If you measure around the trunk instead, divide by 3.14. The calculator’s bands are under 12 in, 12–24 in, 24–36 in, 36–48 in and over 48 in.

Does the price include hauling away the wood?

The calculator assumes so and has no separate debris line, but the public tabs differ: Clark County, Washington’s crew rate includes debris disposal, while North Carolina DOT’s tab does not say. Confirm haul-off with your contractor. There is no discount for leaving the wood, because no public price sets one.

How much more does a tree near the house cost?

No public price we found sets a figure, so the near-house percentage is 0% by default and you choose it. It is added to the tree lines only: at 10% the default job goes from $1,738 to $1,898.

How much does a crew cost per hour for storm cleanup?

The calculator uses $325 per hour, the median of North Carolina DOT’s 7 hourly bids for its Tree Trimming and Clearing item in January 2026 ($300 to $550); the tab does not state the crew size. Four hours come to $1,300.

What is the minimum charge for tree removal?

The calculator uses a $400 minimum job, an estimate. The minimum is a floor that sets the price only when the job adds up to less: one small tree without stump grinding adds up to $375, so the price is $400.

Sources